BLAZING POWER SBW-100KVA Stabilizer Ready for Shipment to a Philippine Hospital for Use with an X-Ray Machine
Overview of Product Assembly Completion
The SBW-100KVA three-phase microprocessor-controlled compensating AC voltage stabilizer, manufactured by BLAZING POWER (Shenzhen Tafeng Technology Co., Ltd.), has just completed full assembly on the production line. Following comprehensive aging and load performance testing, the voltage stabilizer will soon be shipped to a regional hospital in the Philippines to serve as the dedicated stabilized power supply for the hospital’s X-ray diagnostic imaging equipment.
X-ray machines are high-precision medical radiological devices with extremely strict requirements regarding tolerance to power fluctuations. Unstable grid voltage can easily lead to image distortion, burnout of internal circuits, and a shortened service life of core imaging components. This 100KVA industrial-grade three-phase voltage stabilizer is tailor-made for medical radiology loads. It addresses issues such as frequent voltage surges, sags, and three-phase imbalance—which are common in the Philippine power grid—providing comprehensive power protection for the hospital’s X-ray equipment.
This 100KVA three-phase voltage stabilizer is equipped with a high-definition color LCD touch panel on the front cabinet, supporting real-time monitoring of full operating data, working status and fault information. It supports on-site parameter calibration to adapt to the power supply standards of Philippine hospital X-ray equipment. The core operating and performance parameters of the equipment are as follows:
| Parameter Item | Specification |
|---|---|
| Rated Capacity | 100KVA Three-phase |
| Rated Output Voltage | 380V Three-phase |
| Voltage Stabilization Accuracy | ±3% |
| Input Voltage Range | 304V ~ 456V |
| Monitoring Function | Real-time display of input/output voltage, current, load rate, temperature, working mode and fault code |
| Status Indicator | INPUT, AC MAINS, REGULated three-state indication |
| Parameter Adjustment | Local touch screen calibration, adaptable to Philippine medical grid standards |
Unstable power is the top factor leading to X-ray equipment maintenance failures in Philippine grassroots hospitals. This 100KVA stabilizer filters grid surge interference, restrains overvoltage/undervoltage impact, effectively reduce radiology equipment failure frequency, cut hospital post-maintenance costs and avoid medical imaging interruption caused by power faults.
The stabilizer supports wide input voltage range, compatible with unstable rural and suburban power grids in the Philippines. The cabinet adopts thickened cold-rolled steel plate with ventilation heat dissipation holes, adapting to high-temperature and humid tropical climate conditions in Southeast Asia. After passing strict factory load testing, the equipment meets international medical power supply standards, fully meeting long-term continuous operation demands of hospital radiology departments
